To setup an automatic "End of Day" process you must first go into the "Maintenance" section of FasTrak Admin as shown below:
From this section of FasTrak Admin you will need to find the "Housekeeping" menu:
In the "Housekeeping" menu you are able to enable an automatic "End of Day" process and choose specific times for each stage.
To first turn this feature on you need to highlight the "Enabled" option and change this to "True" in the "Settings" box located on the right hand side of the screen as shown below - ensure you click 'Save' once making any changes:
Once this is enabled the automatic "End of Day" process will run using the default times setup in FasTrak Admin. To change these times you will need to edit the following options:
You'll want Steps 3-6 running once you've finished service, and to have each step to run roughly 30 minutes after the previous to allow it plenty of time to complete - These steps are for confirming all pre-orders and generating the report for you to view that days sales. You'll then want Steps 0-2 to be early morning, again leaving either 30 minutes or an hour between each step - These steps are for setting the correct menu and allocating the allowances ready for use the next day.
*Warning: You will need to run a manual end of day once on the day you set this up for the automatic process to start - after that first day then it will run automatically.